Electroporation-based Easi-CRISPR yields biallelic insertions of EGFP-HiBiT cassette in immortalized chicken oviduct epithelial cells.

Laying hens are an excellent experimental oviduct model for studying reproduction biology. Because chicken oviduct epithelial cells (cOECs) have a crucial role in synthesizing and secreting ovalbumin, laying hens have been regarded an ideal bioreactor for producing pharmaceuticals in egg white through transgene or gene editing of the ovalbumin (OVA) gene. However, related studies in cOECs are largely limited because of the lack of immortalized model cells. In addition, the editing efficiency of conventional CRISPR-HDR knock-in in chicken cells is suboptimal (ranging from 1 to 10%) and remains elevated. Here, primary cOECs were isolated from young laying hens, then infected with a retrovirus vector of human telomerase reverse transcriptase (hTERT), and immortalized cOECs were established. Subsequently, an electroporation-based Easi-CRISPR (Efficient additions with ssDNA inserts-CRISPR) method was adopted to integrate an EGFP-HiBiT cassette into the chicken OVA locus (immediately upstream of the stop codon). The immortalized cOECs reflected the self-renewal capability and phenotype of oviduct epithelial cells. This is because these cells not only maintained stable proliferation and normal karyotype and had no potential for malignant transformation, but also expressed oviduct markers and an epithelial marker and had a morphology similar to that of primary cOECs. EGFP expression was detected in the edited cells through microscopy, flow cytometry, and HiBiT/Western blotting. The EGFP-HiBiT knock-in efficiency reached 27.9% after a single round of electroporation, which was determined through genotyping and DNA sequencing. Two single cell clones contained biallelic insertions of EGFP-HiBiT donor cassettes. In conclusion, our established immortalized cOECs could act as an in vitro cell model for gene editing in chicken, and this electroporation-based Easi-CRISPR strategy will contribute to the generation of avian bioreactors and other gene-edited (GE) birds.

Electroporation of SUMO-His-Cre protein triggers a specific recombinase-mediated cassette exchange in HEK 293T cells.

Cre recombinase is a widely-used genetic manipulation of genomic DNA. However, the conventional transfection of the DNA vectors expressing the Cre recombinase or viral transduction method yields low transfection efficiencies or insertion mutagenesis. The present paper evaluated whether the direct protein delivery of Cre recombinase through electroporation can induce the Cre-mediated recombination in the HEK 293T cells. Here, the small ubiquitin-related modifier (SUMO) -tagged His-Cre fusion protein was expressed in a soluble pattern in the Eschrichria coli (E.coli) cells, purified using affinity chromatography, and finally electroporated into the HEK 293T cells. These cells were previously transfected with three different Cre reporter vectors. The electroporation of the HEK 293T cells revealed either the activation of EGFP expression, or a decrease in RFP expression, and a concomitant increase in EGFP expression, indicating a desired recombinase-mediated cassette exchange (RMCE) event (conversion of RFP to EGFP), and a biological activity of the purified SUMO-His-Cre protein. The fusion protein is expected to serve in the Easi-CRISPR-LoxP-mediated genome editing to generate transgenic animal models.

Specificity and application of SOX2 antibody.

Sox2 is known to play an important role in maintaining the totipotency and self-renewal of embryonic stem cells. The purpose of this study was to prepare an anti-chicken Sox2 polyclonal antibody using prokaryotic expression techniques, to evaluate its specificity and to use it to investigate the expression and distribution of Sox2 in the chicken brain and lungs. The chicken Sox2 gene was amplified and subcloned to a pET-30a vector to construct a prokaryotic expression vector, pET-Sox2. A His-Sox2 fusion protein was expressed, purified, and used to prepare an antichicken Sox2 polyclonal antibody. Western blotting revealed that the antichicken Sox2 antibody could specifically bind not only to the purified His-Sox2 fusion protein but also to the endogenous Sox2 protein in the testes of chicken, showing a distinct dose-dependent relationship between antigen and Sox2 antibody. Indirect immunofluorescent staining of Sox2-overexpressing cells showed strong nuclear and diffuse cytoplasmic immunoreactivity for Sox2 in the antichicken Sox2 antibody-staining cells. A CRISPR/Cas9 effector system-mediated Sox2 knockdown assay indicated that Sox2 expression in HEK 293T cells was downregulated in the presence of doxycycline but upregulated in the absence of doxycycline. In addition, cryosectioning and immunohistochemical staining illustrated that most spermatogonia in the seminiferous tubules, and a small number of Sertoli and Leydig cells, were positive for Sox2. The antichicken Sox2 antibody was also successfully used to investigate the expression and distribution of Sox2 in the chicken cerebellar cortex, optic tectum, cerebral cortex, and lungs. The results of this study confirmed the specificity of the antichicken Sox2 polyclonal antibody, which will be available for the study of biological functions of the chicken Sox2 gene and the self-renewal mechanisms of chicken pluripotent stem cells.

Intermolecular Dehydrative Coupling and Intramolecular Cyclization of Ruthenium Vinylidene Complexes Formed from Aromatic Propynes Containing Carbonyl Functionalities.

A remarkable intermolecular dehydrative coupling reaction with the formation of a C-C bond was found for the vinylidene complex 2 a, yielding the dinuclear bisvinylidene complex 4 a. Complex 2 a containing 1-hydroxyindan moiety was first formed from the reaction of o-propynyl benzaldehyde 1 a with [Ru]-Cl ([Ru]=Cp(PPh3 )2 Ru) by a cyclization process. For analogous aldehyde 1 b containing an additional 1,3-dioxolane group on the aryl ring, similar intermolecular coupling yields the dinuclear bisvinylidene complex 4 b. However, the fluoro group on the aryl ring in aldehyde 1 c inhibits the coupling reaction, giving only the vinylidene complex 2 c. For the reactions of [Ru]-Cl in MeOH with compounds 1 f, 1 g and 1 h, each with a ketone functionality, cyclization gives vinylidene complexes 2 f, 2 g and 2 h, respectively. However, no similar intermolecular coupling was observed, instead, the intramolecular dehydration yields 8 f, 8 g and 8 h, respectively. In CDCl3 , catalytic cyclization is observed for the o-propynylphenyl ketone 1 h with [Ru]-Cl at 50 °C giving the isochromene products 14 h. Furthermore, treatment of the o-propynylaryl α,ß-unsaturated ketones 1 k-m and 1 n with [Ru]-Cl in MeOH affords the corresponding vinylidene complexes 10 k-m and 11 n each with 1-benzosuberone moiety in the presence of NH4 PF6 . These intramolecular cyclization products were formed by the addition of Cß onto the terminal carbon of the alkene moiety. All these reaction products were characterized by spectroscopic methods. In addition, structures of complexes 4 a, and 10 l were confirmed by single crystal X-ray diffraction analysis.

Ring Expansion and Skeletal Rearrangement of Propargyl Alcohol Substituted Aziridines Induced by Ruthenium Complexes.

The ring expansion and skeletal rearrangement of two types of propargyl alcohol substituted aziridines with or without cycloalkane moieties was induced by a ruthenium cyclopentadienyl phosphine complex. In the simple aziridine system with no cycloalkane, the unique cycloisomerization process altered the absolute connectivity of the two-carbon unit in the three-membered ring to give organometallic products with substituted pyridine or dihydropyridine ligands. For the aziridine on a cyclohexyl ring, the cycloisomerization process was controlled by an interchange process between vinylidene and allenylidene species, thus creating a better relative configuration of the aziridinyl and the alkynyl units. This determines the stereochemistry of the metal carbene products of the octahydroindole derivatives. The structures of five products were determined by X-ray diffraction analysis.

Characterization of Au and Bimetallic PtAu Nanoparticles on PDDA-Graphene Sheets as Electrocatalysts for Formic Acid Oxidation.

Nanocomposite materials of the Au nanoparticles (Au/PDDA-G) and the bimetallic PtAu nanoparticles on poly-(diallyldimethylammonium chloride) (PDDA)-modified graphene sheets (PtAu/PDDA-G) were prepared with hydrothermal method at 90 °C for 24 h. The composite materials Au/PDDA-G and PtAu/PDDA-G were evaluated by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA) for exploring the structural characterization for the electrochemical catalysis. According to TEM results, the diameter of Au and bimetallic PtAu nanoparticles is about 20-50 and 5-10 nm, respectively. X-ray diffraction (XRD) results indicate that both of PtAu and Au nanoparticles exhibit the crystalline plane of (111), (200), (210), and (311). Furthermore, XRD data also show the 2°-3° difference between pristine graphene sheets and the PDDA-modified graphene sheets. For the catalytic activity tests of Au/PDDA-G and PtAu/PDDA-G, the mixture of 0.5 M aqueous H2SO4 and 0.5 M aqueous formic acid was used as model to evaluate the electrochemical characterizations. The catalytic activities of the novel bimetallic PtAu/graphene electrocatalyst would be anticipated to be superior to the previous electrocatalyst of the cubic Pt/graphene.

Synthesis and characterizations of Ni-NiO nanoparticles on PDDA-modified graphene for oxygen reduction reaction.

We are presenting our recent research results about the Ni-NiO nanoparticles on poly-(diallyldimethylammonium chloride)-modified graphene sheet (Ni-NiO/PDDA-G) nanocomposites prepared by the hydrothermal method at 90°C for 24 h. The Ni-NiO nanoparticles on PDDA-modified graphene sheets are measured by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED) pattern for exploring the structural evidence to apply in the electrochemical catalysts. The size of Ni-NiO nanoparticles is around 5 nm based on TEM observations. The X-ray diffraction (XRD) results show the Ni in the (012), (110), (110), (200), and (220) crystalline orientations, respectively. Moreover, the crystalline peaks of NiO are found in (111) and (220). The thermal gravimetric analysis (TGA) result represents the loading content of the Ni metal which is about 34.82 wt%. The electron spectroscopy for chemical analysis/X-ray photoelectron spectroscopy (ESCA/XPS) reveals the Ni(0) to Ni(II) ratio in metal phase. The electrochemical studies with Ni-NiO/PDDA-G in 0.5 M aqueous H2SO4 were studied for oxygen reduction reaction (ORR).

Structure and emission studies of dimorphic crystals of [PtBr2(5,5'-bis(CF3CH2OCH2)-2,2'-bpy)] (1).

The yellow (1y) and orange (1o) crystalline polymorphs of [PtBr2(5,5'-bis(CF3CH2OCH2)-2,2'-bipyridine)] exhibit surprisingly short nearest neighbour Pt···Pt separations of 3.526 Å and 3.590 Å, respectively, at 295 K. Both distances are much shorter than those found in structures of the unsubstituted [PtBr2(2,2'-bipyridine)] analogue. Consistent with a linear chain structure in 1o and dimer formation in 1y, both solids exhibit emission spectra shifted to much longer wavelengths than that exhibited by the monomer in a low-temperature glass. Furthermore, the emission spectra of 1o and 1y shift to even longer wavelengths as the temperature decreases and the Pt···Pt separations contract. Till now delocalized emission of this type has been considered to be restricted to [PtCl2(diimine)] systems and implausible in PtBr2-containing analogues for steric reasons. Ironically, in the system at hand the bulky 5,5'-substituents apparently promote delocalization of the emission by forming a network of hydrogen-bonding-like C-H···F-C interactions that help shape the packing.

The microwave-assisted ionic liquid nanocomposite synthesis: platinum nanoparticles on graphene and the application on hydrogenation of styrene.

The microwave-assisted nanocomposite synthesis of metal nanoparticles on graphene or graphite oxide was introduced in this research. With microwave assistance, the Pt nanoparticles on graphene/graphite oxide were successfully produced in the ionic liquid of 2-hydroxyethanaminium formate [HOCH2CH2NH3][HCO2]. On graphene/graphite oxide, the sizes of Pt nanoparticles were about 5 to 30 nm from transmitted electron microscopy (TEM) results. The crystalline Pt structures were examined by X-ray diffraction (XRD). Since hydrogenation of styrene is one of the important well-known chemical reactions, herein, we demonstrated then the catalytic hydrogenation capability of the Pt nanoparticles on graphene/graphite oxide for the nanocomposite to compare with that of the commercial catalysts (Pt/C and Pd/C, 10 wt.% metal catalysts on activated carbon from Strem chemicals, Inc.). The conversions with the Pt nanoparticles on graphene are >99% from styrene to ethyl benzene at 100°C and under 140 psi H2 atmosphere. However, ethyl cyclohexane could be found as a side product at 100°C and under 1,520 psi H2 atmosphere utilizing the same nanocomposite catalyst.

Nanocomposite for methanol oxidation: synthesis and characterization of cubic Pt nanoparticles on graphene sheets.

We present our recent results on Pt nanoparticles on graphene sheets (Pt-NPs/G), a nanocomposite prepared with microwave assistance in ionic liquid 2-hydroxyethanaminiumformate. Preparation of Pt-NPs/G was achieved without the addition of extra reductant such as hydrazine or ethylene glycol. The Pt nanoparticles on graphene have a cubic-like shape (about 60 wt% Pt loading, Pt-NPs/G) and the particle size is 6 ± 3 nm from transmission electron microscopy results. Electrochemical cyclic voltammetry studies in 0.5 M aqueous H2SO4 were performed using Pt-NPs/G and separately, for comparison, using a commercially available electrocatalyst (60 wt% Pt loading, Pt/C). The electrochemical surface ratio of Pt-NPs/G to Pt/C is 0.745. The results of a methanol oxidation reaction (MOR) in 0.5 M aqueous H2SO4 + 1.0 M methanol for the two samples are presented. The MOR results show that the ratios of the current density of oxidation (If) to the current density of reduction (Ib) are 3.49 (Pt-NPs/G) and 1.37 (Pt/C), respectively, with a preference by 2.55 times favoring Pt-NPs/G. That is, the tolerance CO poisoning of Pt-NPs/G is better than that of commercial Pt/C.

4,4'-Bis(2,2,2-trifluoroethoxymethyl)-2,2'-bipyridine.

As part of a homologous series of novel polyfluorinated bipyridyl (bpy) ligands, the title compound, C(16)H(14)F(6)N(2)O(2), contains the smallest fluorinated group, viz. CF(3). The molecule resides on a crystallographic inversion centre at the mid-point of the pyridine C(ipso)-C(ipso) bond. Therefore, the bpy skeleton lies in an anti conformation to avoid repulsion between the two pyridyl N atoms. Weak intramolecular C-H...N and C-H...O interactions are observed, similar to those in related polyfluorinated bpy-metal complexes. A pi-pi interaction is observed between the bpy rings of adjacent molecules and this is probably a primary driving force in crystallization. Weak intermolecular C-H...N hydrogen bonding is present between one of the CF(3)CH(2)- methylene H atoms and a pyridyl N atom related by translation along the [010] direction, in addition to weak benzyl-type C-H...F interactions to atoms of the terminal CF(3) group. It is of note that the O-CH(2)CF(3) bond is almost perpendicular to the bpy plane.

Synthesis and characterization of [Pb{Se2P(OiPr)2}2]n pseudo polymorphs: polymeric, single source precursor enabling preparation of shape-controlled lead selenide structures.

Novel lead pseudo polymorphs supported by diselenophosphate (dsep) ligands, [Pb{Se(2)P(O(i)Pr)(2)}(2)](n) (1alpha and 1beta), were synthesized and structurally characterized. The two structures differed in the binding modes of the dsep ligand. Each repeating unit in 1alpha was composed of a lead atom coordinated by two dsep ligands, one in a chelating mode and the other in a bridging-dangling mode. By contrast, the dsep ligands in 1beta adopted a bimetallic-biconnective (mu(1)-S, mu(1)-S) binding pattern. The bridging-dangling mode observed in 1alpha is the first example of this mode for the dsep ligand. [Pb{Se(2)P(O(i)Pr)(2)}(2)](n) could be successfully utilized as a single source precursor (SSP) for growing lead selenide (PbSe) nanostructures with different shapes via the solvothermal process. The morphologies of the as-grown PbSe structures were controlled by capping agents, poly(vinyl pyrrolidone) (PVP) and ethylenediamine, both bind on the {200} plane and enhance the growth rate of the <111> direction of the PbSe crystals, resulting in the formation of cubes and eight-horned rod dendrites, respectively. Raman spectroscopy was utilized to investigate the phonon vibration behaviour of the as-grown eight-horned rod dendrites. All peaks in the Raman spectra can be attributed to longitudinal (LO) and transverse (TO) optical phonon modes of the PbSe rod dendrites.

Modified procedure for improved synthesis of some octameric silsesquioxanes via hydrolytic polycondenzation in the presence of Amberlite ion-exchange resins.

Practical alternative procedures are described for the syntheses of octavinylsilsesquioxane 1, octaphenylsilesquioxane and octabenzylsilsesquioxane. The hydrolytic polycondensation of RSiX3 (R = CH2=CH-, C6H5- or C6H5CH2-; X = Cl, OCH3, or OC2H5) in the presence of solid acid or base Amberlite ion-exchange resin gave improved yields of the corresponding octameric oligosilsesquioxanes. Repetitive usage of the Amberlite resin as the hydrolysis reagent was tested during synthesis of 1. The results indicate that it could be used many times in the same solvent making the procedure a more economically viable technique.

3,6-Bis(2-pyridyl)di-1,2,4-triazolo[3,4-a:4',3'-c]phthalazine.

The title compound, C20H12N8, (I), has been prepared by the reaction of 1,4-dihydrazinophthalazine and pyridine-2-carboxaldehyde, followed by an oxidative cyclization by treatment with bromine. In the solid state, the molecules of (I) are discrete, comprising a fused and twisted four-ring system with an overall helical appearance. The distance between the two intramolecular pyridyl N atoms is 3.075 (2) A, this short contact distance suggesting a pi-pi interaction.